Product Description

Single jet Full Liquid Sealed Vane Wheel HOT/COLD Water meter 

Features 
1. The register is contained in a liquid filled sealed housing which is not subject to discoloration by scale, dirt or any deposit 
2. Wet dial 
3. Mechanical transmission movement equates to maximum reliability 
4. Inlet strainer 
5. Particularly suited in lower quality water 

Compliance with Standard 
Technical data conforms to ISO 4064 Class B Standard for horizontal installation 

Application 
Measuring the volume of cold potable water passing through the pipeline 

Working Conditions 
Water temperature : ≤ 40 ºC 
Water pressure: ≤ 1.6 MPa 

Option 
Meter equipped with reed switch is available 

Installation Requirements 
1.The meter should be installed in horizontal position with the register face upwards 
2.Pipeline must be flushed before installation 
3.The meter should be constantly full of water during operation 


DN13-DN25: maximum flow rate with m³/h and arrow are indicated on the both sides of the meter body 
DN32: maximum flow rate and arrow are indicated on the both sides of the meter body 
The lid can open not more than 120°